|
|
Post by Steve King (Admin) on May 13, 2006 21:56:24 GMT -6
|
|
|
|
Post by Eric23 on Aug 6, 2006 9:03:23 GMT -6
Just found out about this site...LOVE IT! I would like some detailed plans for a rectangular 3 hole set, but the link (Minn Washers Const) isn't working. Can anyone help?
|
|
|
|
Post by Steve King (Admin) on Aug 6, 2006 9:12:56 GMT -6
Eric, I just check the link for the Minnesota washers. It does work fine. It is in .pdf format, therefore, you will need to have Adobe Acrobat Reader to open it. This is free software found on the web. Also, if you are running dial-up, it may take a bit longer to open. Thanks for the kind words about the site. We are always trying to improve to make it better and a fun place to come! Steve www.TossingGames.com |
|
|
|
Post by Brandon on Aug 14, 2006 18:32:15 GMT -6
Could someone tell me the diameter of the holes in the board and also the thickness of the washers used?
Thanks!
|
|
|
|
Post by Steve King (Admin) on Aug 14, 2006 20:04:29 GMT -6
The holes are 4" in diameter each. Thickness of the washers, hmm, ya got me there. My 2" dia. washers that I use for my square box game are 1/8" thick, therefore, I would guesstimate that these 3 1/4" washers would range from a 1/8" thickness to a 3/16" thickness. Some even use 3 1/2" diameter washers for the 4" hole dia. game.
|
|
|
|
Post by Brandon on Aug 16, 2006 14:55:38 GMT -6
Thanks Steve. The only ones I could find locally were 3.25" o.d. 1" i.d. with 1/4" thickness. I'm going to give those a shot and see how they do.
|
|
) 
